7 Ways To Protect Your Home From Floods

7 Ways To Protect Your Home From Floods

According to the National Oceanic and Atmospheric Administration, flooding is the most common and one of the most expensive natural disasters in the U.S. In fact, recent statistics show that if you live in a high-risk area, you may have a 1 in 4 chance of flooding in a span of 30 years. A flood can be very destructive, pose a danger to humans, and destroy properties. Those living in high-risk areas are well-aware of their capacity to cause destruction. But, this disaster can also occur in low-risk areas, which means any home can be vulnerable to flooding. Thus, it is imperative to protect your home from floods. 

Even an inch of water can cause considerable damage to your home. Thus, aside from insurance, it is crucial to take a few precautionary measures to minimize your chance of dealing with flood-damaged property. Follow these steps to protect your home from flooding

 

What Is A Flood?

A flood is an overflow of water that submerges dry land. This natural disaster may occur in several ways, like rains, snow, storm surges, coastal storms, dams overflows, and others. In some instances, floods can develop quickly. But, it can also occur over a long period, weeks, or even months. Flash floods, the most dangerous kind of floods can come with no warning and can cause significant damage in properties. Whenever a flood occurs, there is a possibility of casualties, damage to roads, challenges to people, and extensive property damage. 

 

Ways To Protect Your Home From Floods

 

1. Secure Your Home’s Electrical System

 

All electrical equipment in homes such as switches, sockets, circuit breakers, and even your furnace and water heater should be placed at least 1-foot above flood level. This helps reduce the risk of electrical damage in your home. 

 

 

2. Retrofit Your Home

 

If flooding frequently occurs in your home and moving is not possible, take extreme measures to prevent flood damage in your property. Here are some ways you can retrofit your home. 

  • Apply coatings and sealant on your walls, foundation, doors, and windows to prevent water from seeping into your home. 
  • If you see any cracks on your foundation, make sure to seal them up. Cracks or gaps on the foundation can allow water to penetrate your home. You may use mortar or masonry caulk to fill in the gaps and cracks. But if the problem persists, you may need to look for a permanent solution. 
  • Consider installing foundation vents. Foundations vents help prevent water from rising inside and causing more damage to your home’s structure. This allows floodwater to flow through your home. 

 

 

3. Install Battery-Powered Sump Pumps

 

Sump pumps are great tools when it comes to protecting the lower part of your home, usually your basement, from flooding. It is designed to pump out any excess water that has the potential to cause significant flooding. But, to ensure that it works well in a call to action, install a battery-operated sump pump. It can work well even during a power outage.  

 

 

4. Grade The Lawn Away From Your Home

 

If water accumulates around the foundation during an average rainstorm, it means that the lawn is tilted to your home. When water accumulated around your home, it will eventually seep inside and cause significant damage to your property. Make sure that the ground is graded away from your home. A good rule of thumb is to grade the ground around your foundation in all directions for at least 2-3 inches every 10 feet.  

 

 

5. Move Valuables To A Higher Level

 

Just like your home, you would also want to protect its contents from floodwater. Move belongings such as electrical equipment, furniture, photographs, and artwork to a higher level. If you have a multiple-story home, consider shifting them to a higher floor. 

Consider also storing essential documents in a waterproof container and be sure to create digital copies with password protection of these documents. 

 

 

6. Install Check Valves

 

Check valves allow waste to flow only in one way and protect your home from sewage backup. 

Because of an excessive inflow of water during severe weather, sewer systems can become damaged. When the water continues to rise, it can lead to sewage backup and create significant damage to properties. Thus, it is necessary to install check valves in the drain line.

Lastly, it is best to install valves on all pipes that are entering your home. 

 

 

7. Install Flood Sensors

 

Flood sensors are great add-on equipment to your home. This smart device will send you an alert once it has detected water in areas that should be dry. Installing flood sensors in your home keep your property from having significant flood damage and save you from spending thousands of dollars for repair. 

 

Professional Flood Damage Restoration Service By Superior Restoration

A flood can occur anytime; thus, it is vital to prepare for it. Taking these preventative steps can help you protect your home from flooding. However, in the event, a flood took its toll on damaging your property and other valuables, contact Water Damage Rancho Cucamonga of Superior Restoration immediately. We offer thorough cleanup and water damage restoration services caused by floods. 

Our certified technicians have skills and experience to properly and thoroughly clean and restore your home, including valuables that have been affected. From start to finish, we work efficiently to ensure that your home is back to its pre-damaged condition. Contact us today to know more about our water damage restoration services. 

water damaged carpet

Salvaging Water Damaged Carpet

Water damage leads to other damages in the home including the carpet. Carpet is one of the most common and trendy floorings we can see in many homes. It also provides safety to the people living in the house most especially to children. However, water damage in the carpet is also difficult to handle.  Cleaning and drying water damaged carpet takes a lot of work and effort. It can be done by homeowners provided they have the proper tools and equipment to do it. 

Is the Water Damaged Carpet Salvageable or Not?

Here are some things to consider before drying a carpet after water damage

1. Age of the Carpet

If the carpet is already old, water weakens it. Old carpet is difficult to save because the water will most likely damage the backings. When the carpet is old, usually the backing deteriorates or even pull away from the carpeting. If the carpet is old, it is better to replace it with a new one. 

2. The degree of the damage

Salvaging carpet depends on the degree of damage involved. It is difficult to dry carpet when it already absorbed much water. If the water sat for a long time, it might be difficult to handle.

3. The source of the water

There are three types of water that may damage the carpet. Clean water sources such as tap water and broken water line do not pose any harm. But don’t let the water sit on the carpet for a long time. On the other hand, flood water contains contaminants and you need help from a professional to salvage your carpet. They not only dry your carpet but clean it thoroughly using special equipment. 

Drying a Water Damaged Carpet

Here are some things we need to do to dry the carpet. 

1. Remove the Standing Water

It is better to remove the standing water as soon as you can to avoid the growth of mold and other damages. You may need to use a pump to extract the water. You can easily rent pump equipment and rental companies usually recommend which pump is best depending on your situation. 

2. Extract the excess water 

You can use a wet vacuum to extract the excess water from the carpet. It takes time to remove the excess water using this method so it also requires your patience and hard work. 

3. Move the wet carpet from the floor. 

Moving the wet carpet from the floor will prevent more damage. To remove the carpet, carefully pull it away. Avoid using too much force to keep the carpet intact. 

4. Replace carpet padding with a new one. 

Carpet padding is like a sponge that absorbs a lot of water. If you will use it again, it will be damp and develop mildew and molds. Once you remove the carpet padding, dispose of it immediately. 

5. Dry the carpet and the flooring. 

Completely drying the carpet takes time. It depends on your tools and the temperature. Use a high powered blower, fans, and dehumidifier to help in the drying process. 

6. Sanitize your carpet.

Bacteria thrive in the wet and damp areas. It is necessary to sanitize an area to remove germs and bacteria and to stop their growth. Use antimicrobial and antibacterial carpet cleaner to sanitize your carpet. 

7. Dry your carpet completely.

After sanitizing your carpet, it is important to dry it one more time. Once completely dry, you should not see any sign of mold. 

 

Call a Water Damage Professional 

Drying a carpet is doable but requires effort and time. If your carpet has severe damage, it is necessary to let a professional handle the situation so that they can assess the extent of the damage and do appropriate steps to fully remove all the water and let your carpet gets back to normal. Trust Superior Restoration & Shamrock Cleaning for all your water damaged carpet needs!