vacuum drying water damaged carpet

5 Steps In Drying Water Damaged Carpeting

Even a small amount of water can cause your carpet to become soggy. Whatever the cause is, it is important to dry water damaged carpeting as quickly as possible to prevent mold growth and damage to walls and sub-flooring. Depending on the severity of the damage, fixing water damaged carpeting can be done on your own. However, water damage restoration experts recommend that you hire a professional team to repair wet carpeting to ensure proper drying and cleaning.


How To Dry Water Damaged Carpeting

Step 1: Assess the Situation

Before taking the step to dry out your carpeting, you have to assess the situation first. Does the water contain contaminants that might put you in danger? What is the extent of the damage? Is your carpeting new and has not been damaged in the past? Has mold started to colonize your carpeting?

If you want to repair your carpeting on your own, the water involved should be in category 1- or clean water. It means the water that has caused water damage is from the supply line, broken pipes, or rain. If the source of the water is contaminated, it is not safe for you to dry out your water damaged carpeting.   

In the case of the severity of the damage, it can be easy to dry out carpeting that has one or two inches of water. But when there is more water involved, the carpet would be difficult to save. The same goes for the carpet that has been damaged in the past or an old one. The backing of old carpeting can get deteriorated over time, and when once damaged in the past can cause it to fall apart.

Lastly, check the carpeting if mold has already started to grow on its surface. Moisture and the organic material on the carpet can be the perfect condition for mold to grow.

Once you know what situation you are going to deal with, you may begin the drying process. If you are not seeking the help of the professional team to restore your carpet, make sure to wear protective gear, like gloves, masks, and boots to protect yourself from things that might be on the carpet.


Step 2: Dry Out The Damaged Carpeting

Water damaged carpeting can be the best place for mold to grow, that is why you should take the process with speed. The damaged carpet will most likely be saved when the carpet is fully dry within 24 hours. You can use a wet/dry vacuum to pull out the water from the carpet. This method can be inexpensive but it is time-consuming. You may also set up blowers, fans, or dehumidifiers to help dry the carpet faster. Setting them up allows proper air circulation. If the weather permits, open windows or doors to give aide in the process of drying. You may also rent commercial equipment to help drying the carpet.


Step 3: Check The Carpet Padding

Unfortunately, even padding that is made of urethane foam can be a victim of water damage. And, when water takes its toll on the padding, it is hard to completely dry out and at times water retains in the padding. If you have padding and it is wet, pull up the carpet and remove the padding under it. You should wear gloves in doing the process and when removed, throw it away. When done, place the carpet flat and continue with the drying process. You should keep the blowers and dehumidifiers on to fully dry the carpet.

 Moreover, you should also check the subfloor. If the subfloor has been affected by water damage, you should place fans and dehumidifiers to dry the floor. Check for signs of warping and buckling. If there are sections that have been damaged, replace them. Once the floor is fully dry, disinfect it with a disinfectant solution and wait for it to completely dry out.


Step 4: Reinstall The Carpet

Once the subfloor and the carpet are completely dry, you may get a new carpet pad and lay your carpet back to its place. A once wet carpeting can be difficult to deal with, so if necessary, hire a professional to ensure that the carpet is installed properly and securely to prevent unsightly bulges and bunching.


Step 5: Clean Water Damaged Carpeting

Now that you have completely dried out the carpet, you may want to make sure that there are no dirt, germs or contaminants that can linger on your once wet carpeting. You may use a steam cleaner or any carpet cleaning system and rent a machine to completely clean your carpet. You may also consider hiring a professional team to do all the cleaning. At the end of the cleaning process, you may apply an anti-microbial sanitizer to prevent mold growth.


The steps above can help you save your carpeting. But in most cases, fixing water damaged carpeting is best left to professionals who are experts in drying and cleaning carpets. They can do the work properly as they are equipped with proper equipment and knowledge. Leaving this job to professionals can give you more chances of saving your carpet and eliminate chances of mold growth. Our company, Water Damage Rancho Cucamonga, can handle all kinds of water damage including carpet cleaning and restoration. We also deal with all kinds of fire and flood damage, so you can contact us for any restoration services you may need.

Water in Air Duct

The Danger Of Water in Your Air Duct and How To Avoid It

Have you noticed water droplets forming around your air duct? It could be the moisture build-up that occurs mostly in summer months when your AC unit works the hardest to cool down your home. Moisture can seem harmless, but when left untreated, it can lead to destructive problems and expensive repairs.


There are a few reasons why there is water in your air duct. A tiny amount of dew outside your duct is common when the air outside is hot and your AC is on. But, large water droplets that keep on occurring can mean something is wrong.


If there is insufficient insulation, moisture can appear in the air duct. Another culprit of having water in the air duct is the excess indoor humidity that is coming from your attic or crawlspace. Air leak can also cause moisture to collect in summer. It happens when the boot that connects the duct to the vent is not properly sealed.


Fortunately, this problem can easily be solved, yet it has to be taken seriously to keep you from facing serious problems.


The Danger Of Water In Your Air Duct

These droplets of water might look small, but they can cause negative effects on your health and home.

It Can Lead To Mold Growth 

Moisture build-up on your air duct can cause mold to grow. Giving mold enough time and condition to grow, it can spread in your entire home and cause hazards to your home’s structure. What is even worse is it can easily spread through your vents attacking your carpet, furniture and other materials prone to mold growth. Aside from that, mold spores spreading in your home can reduce your indoor air quality and promote health hazards such as asthma, rhinitis, allergies and other health issues.


It Can Affect Your Home’s Insulation 

The water that builds in your duct can drip into your home’s insulation, reducing your home’s insulation R-value. Gradually, the weight and moisture can compress your insulation and the more it gets compressed the lesser it becomes efficient.

Remember that your insulation helps you save up to 10% of your total annual energy bills. When the R-value of your home’s insulation decreases, you might be facing unwanted energy loss and higher utility bills.


Water Droplets Can Cause Severe Water Damage

Moisture build-up in your ductwork can be the source of water damage to your ceiling, roof, and walls. Little by little, they can cause corrosion or decay in those materials and if moisture stands for a longer time can compromise your home’s structure.


How To Prevent Moisture Build-up In your Ductwork

Now, that you understand the danger water in your ductwork can do, taking some preventative steps is crucial.


Insulate Your Duct Work

Insulating your ductwork does not only help in saving energy, but it also prevents them from having condensation build-up. In the cold season, you can prevent moisture to form by allowing warm air to circulate through unused ductwork.


Seal Unused A/C Vents

Seal off unused A/C air ducts and supply and return vents if moisture is persistent, especially in winter. Remove the blockage to allow air flows properly and make sure not to airtight the dampers. Moreover, you can use foam-board insulation or plastic sheeting to close the duct.


Repair or Remove Underlying Issues

As mentioned, there could be a lot of sources of moisture build-up. It can be the water leak from your pipes or a leak that is coming from the roof. Or, maybe the clothes-dryer vent flows freely and leaks. It can also be your humidifier that is turned up too high or your furnace venting system, bathroom vents, and cook range vents are leaking.

A leak from any of these sources can lead to moisture problems and if not addressed properly and immediately will end up to extensive water damage. You can use a hydrometer to check the humidity level of your home.


Use a Dehumidifier

Set up a dehumidifier in the area where your air ducts are accumulating water. This helps in preventing condensation build-up in your ductwork and controlling moisture in the air.


Schedule a Regular Maintenance 

Nothing beats proper and timely maintenance. Human hair, dust, debris, pet dander, and dead insects can clog your air ducts. These blockages can restrict air to flow freely in your a/c and could even lead to dehumidifying problems.

However, cleaning your ductwork is not an easy thing to do because they are quite difficult to access. It is best to leave it to professionals. They have the necessary tools and equipment in removing clogs.


Don’t let Moisture Affect Your Home’s Structure and Indoor Quality

Now, that you understand the danger moisture in your ductwork can do, take steps to prevent them. Start by cleaning your air duct, even it seems not dirty on the outside, it might be dirty on the inside.


Let water damage Rancho Cucamonga help you. We provide air duct cleaning services and inspection to provide our homeowners peace of mind and a healthy home. Please get in touch with us today.

tile flooring water damage

How Can Excessive Water Damage Your Tile Flooring

Water damage can sometimes occur in its most quiet way, and when you find it, you already have extensive damage that might require expensive repairs. The cost and the type of repairs may vary depending on the location. If it is the drywall that has water damage due to a leak, you might need a minor repair or replacement. But if excessive water damage to your tile flooring (in your bathroom, kitchen, basement, etc.), you might have to spend a lot of money on repairs and experience undesirable inconvenience.

Moreover, the moisture that was accumulated can become an invitation for mold and mildew, spreading in the entire area and causing harmful effects to your tiles and health.

Tile floors can add beauty to the interior of your home. However, they can also be at risk of water damage when excessive water stays on the surface.

What Happens When Water Damage Your Tile Flooring

Fortunately, the tiles that are often used in moisture-prone areas such as bathroom, kitchen, basement and other areas are waterproof. The tile itself doesn’t get damaged by excessive water. However, when water finds its way past to the tile or grout, it can start to create real damage and the most common one is loosening the tile from its subsurface. When under wet conditions, the mortar that holds the tile from its position will become loosen and deteriorated, causing the tile to lift away from the floor or wall.

A subsurface or subflooring that is not waterproof,  could create further damage. Water can cause the subsurface to swell and warp, and pushing the tile to lift even harder.

When excess moisture is present, it could cause mold and mildew growth, eating away the mortar even further.

 A clears sign that you have water damage to your flooring in your home is when tiles are starting to loosen up and lifting away from its subsurface. Fix the damage right after you notice it to prevent expensive repairs.

How Can Water Damage Your Tile Flooring

In any type of water damage, there is always a reason behind it. Luckily, tiles that are often used in our homes today are considered waterproof. However, they can still experience water damage due to the following;

Grout Doesn’t Last Forever

Any type of grout is not designed to last forever. The tile doesn’t allow moisture to penetrate to its subsurface, but the grout (or the thin lines between tiles) is prone to water damage. When the grout becomes deteriorated, it can cause moisture to penetrate to the tile subsurface. Unfortunately, any tiled surface, even in areas resistant to moisture or humid conditions, is not waterproof. When water is left standing on the surface, it can start to seep into the seal, loosening the tile and the grout and causing water to leak to its subsurface.

Sealing grout regularly, for about every six months, can help in repelling water. If not, the grout will start absorbing water causing severe water damage to your tile flooring.

Cracks and Gaps

Aside from deteriorated grout, cracks and gaps can cause extensive water damage to your subflooring that is especially when it is made of wood. The crack doesn’t have to be big to create considerable damage to your flooring. Cracks and gaps can allow water to penetrate and seep underneath or behind your subflooring.

Repairing any tile, grout, cracks, and gaps can prevent you from having excessive water damage.

How to Control Water Damage in Your Tile Flooring

Water damage is a serious business. Whether the damage begins from undetected water leaks and eventually becomes destructive or that damage that occurs accidentally like flooding, water damage can cause major property to lose and health hazards. That is why preventing causes of water damage is vital.

Give your tile flooring regular maintenance and check-up. Make sure that you limit water to get in contact with your tile surface. In case of flooding, remove the standing water immediately. You can use a squeegee and a cloth to remove and wipe off standing water. Reseal the grout regularly, especially in areas where water contact cannot be avoided, like shower floors and walls. When you see caulk started to dry or crack, (edges of sinks and showers), replace it immediately.

What if water has already damaged my tile flooring?

If you see one or two of tiles have started to lose, pull them up to see what damage has occurred. If the subflooring has started to rot, it’s an indication of severe damage. Find the source of the water leak and take care of the affected area. It is also best to inspect the surrounding areas. They might not have been damaged yet, but checking them thoroughly can prevent you from having further damage.

Make sure to perform proper tile care to prevent water damage to your tile flooring. But if you are in situations that you need someone to help you with your tile restoration, consider working with us. Our services include tile and grout cleaning and restoration. We, at Superior Restoration, can help you deal with your water damage tile flooring. Call us today!

water damaged carpet

Salvaging Water Damaged Carpet

Water damage leads to other damages in the home including the carpet. Carpet is one of the most common and trendy floorings we can see in many homes. It also provides safety to the people living in the house most especially to children. However, water damage in the carpet is also difficult to handle.  Cleaning and drying water damaged carpet takes a lot of work and effort. It can be done by homeowners provided they have the proper tools and equipment to do it. 

Is the Water Damaged Carpet Salvageable or Not?

Here are some things to consider before drying a carpet after water damage

1. Age of the Carpet

If the carpet is already old, water weakens it. Old carpet is difficult to save because the water will most likely damage the backings. When the carpet is old, usually the backing deteriorates or even pull away from the carpeting. If the carpet is old, it is better to replace it with a new one. 

2. The degree of the damage

Salvaging carpet depends on the degree of damage involved. It is difficult to dry carpet when it already absorbed much water. If the water sat for a long time, it might be difficult to handle.

3. The source of the water

There are three types of water that may damage the carpet. Clean water sources such as tap water and broken water line do not pose any harm. But don’t let the water sit on the carpet for a long time. On the other hand, flood water contains contaminants and you need help from a professional to salvage your carpet. They not only dry your carpet but clean it thoroughly using special equipment. 

Drying a Water Damaged Carpet

Here are some things we need to do to dry the carpet. 

1. Remove the Standing Water

It is better to remove the standing water as soon as you can to avoid the growth of mold and other damages. You may need to use a pump to extract the water. You can easily rent pump equipment and rental companies usually recommend which pump is best depending on your situation. 

2. Extract the excess water 

You can use a wet vacuum to extract the excess water from the carpet. It takes time to remove the excess water using this method so it also requires your patience and hard work. 

3. Move the wet carpet from the floor. 

Moving the wet carpet from the floor will prevent more damage. To remove the carpet, carefully pull it away. Avoid using too much force to keep the carpet intact. 

4. Replace carpet padding with a new one. 

Carpet padding is like a sponge that absorbs a lot of water. If you will use it again, it will be damp and develop mildew and molds. Once you remove the carpet padding, dispose of it immediately. 

5. Dry the carpet and the flooring. 

Completely drying the carpet takes time. It depends on your tools and the temperature. Use a high powered blower, fans, and dehumidifier to help in the drying process. 

6. Sanitize your carpet.

Bacteria thrive in the wet and damp areas. It is necessary to sanitize an area to remove germs and bacteria and to stop their growth. Use antimicrobial and antibacterial carpet cleaner to sanitize your carpet. 

7. Dry your carpet completely.

After sanitizing your carpet, it is important to dry it one more time. Once completely dry, you should not see any sign of mold. 


Call a Water Damage Professional 

Drying a carpet is doable but requires effort and time. If your carpet has severe damage, it is necessary to let a professional handle the situation so that they can assess the extent of the damage and do appropriate steps to fully remove all the water and let your carpet gets back to normal. Trust Superior Restoration & Shamrock Cleaning for all your water damaged carpet needs!